-50-
Model W1854 (For Machines Mfd. Since 02/18)
PA
RT
S
W1854
MODEL W1854
18" OPEN-END DRUM SANDER
Motor: 1.5 HP, 110V, 1-Phase, 60 Hz
Full-Load Current Rating: 13A
Max. Board Width: 36"
Min. Board Width: 1"
Max. Board Thickness: 4-1/2"
Min. Board Thickness: 1/8"
Min. Board Length: 6"
Conveyor Feed Rate: 0–12 FPM
Sandpaper Speed: 2600–3400 FPM
Sandpaper Length: 89-1/8"
Sandpaper Width: 3"
Sanding Belt Tension: Spring Loaded
Weight: 198 lbs.
Specifications
Date
SN
Mfd. for Woodstock in China
WARNING!
To reduce the risk of serious injury while using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Never place hands near or in any opening during operation.
5. Never touch moving sandpaper or conveyor belt.
6. Never sand more than one board at a time.
7. Make sure sander is properly assembled, adjusted, and stable before
operating. Only operate with top cover closed and secured.
8. Be aware of pinch points located at the edge of conveyor.
9. Only remove jammed pieces when machine is stopped and disconnected
from power.
10. Turn motor OFF and disconnect power before changing sandpaper,
opening machine, or servicing.
11. Do not wear loose clothing, gloves, jewelry, or other articles that can get
entangled. Tie back long hair and roll up sleeves.
12. Do not expose to rain or use in wet locations.
13. Do not operate under influence of drugs or alcohol, or if tired.
14. Prevent unauthorized use by children or untrained users; restrict access
or disable machine when unattended.
WARNING
ENTANGLEMENT
HAZARD!
Tie back long hair
and roll up sleeves
before using this
machine.
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.woodstockint.com
or call (360) 734-3482.
WARNING!
201
202
203
204
205
206
207
208
209 210
208
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
201 X1854201 READ MANUAL LABEL
206 X1854206 MACHINE ID LABEL
202 X1854202 DISCONNECT POWER LABEL
207 X1854207 MODEL NUMBER LABEL
203 X1854203 SHOP FOX NAME PLATE (SMALL)
208 X1854208 ELECTRICITY LABEL
204 X1854204 EYE/LUNG HAZARD WARNING LABEL
209 X1854209 TOUCH-UP PAINT, SHOP FOX WHITE
205 X1854205 ENTANGLEMENT WARNING LABEL
210 X1854210 TOUCH-UP PAINT, GLOSSY BLACK
Labels.&.Cosmetics
Safety.labels.warn.about.machine.hazards.and.how.to.prevent.serious.personal.injury..The.owner.
of.this.machine.MUST.maintain.the.original.location.and.readability.of.all.labels.on.this.machine..
If.any.label.is.removed.or.becomes.unreadable,.REPLACE.that.label.before.allowing.machine.to.
be.operated.again..Contact.us.at.
(
360
)
.734-3482.or.www.woodstockint.com.to.order.new.labels..
Summary of Contents for W1854
Page 53: ...Model W1854 For Machines Mfd Since 02 18 ...
Page 56: ......