The seats on Shoprider scooters vary from
model to model. However, most seats have
the same basic functions. Please refer to the
information provided.
1. Adjustable Seat Slide:
(figure 3)
Located on the right front of the seat.
This lever allows you to adjust your seat
forward and back (this option is not
standard on all scooters).
Simply pull up on the lever and move in
the desired direction. As soon as you
release the lever, the seat will lock in the
new position you have selected.
2. Adjustable Armrest Width:
(figure 4)
On each side underneath the seat you
will find a knob. By simply loosening this
knob you are now able to adjust the
armrests to whatever width you desire
or remove them completely. Some mod-
els are fitted with allan head bolts.Tools
may be necessary to adjust.
3. Flip up Armrests:
(figure 4)
By simply pulling up on the end of either
armrest it will flip up for easy transfer in
and out of your SHOPRIDER™.
When the armrest is flipped up you will
notice there is a bolt that can be adjust-
ed up or down to change the angle of
the armrest.
*Some models have a screw under
the armrest and by turning the screw the
angle of the armrest can be adjusted.
4. Armrest Height Adjust:
(figure 5)
Located in the armrest supports, there is
a threaded knob that can be unscrewed
and repositioned into four different
height positions
5. Seat Lock Lever:
(figure 3)
This allows the seat to be turned in 90°
increments automatically locking into
position.To rotate the seat simply pull up
on the lever which will release the seat
and turn the seat to the desired quad-
rant.This seat lock lever can be made for
left or right hand operation.
6. Seat Tighten Knob:
(figure 3)
This knob is to provide extra stability in
the seat post.
NOTE:This is not for seat height adjust-
ment.
Seat Controls
page 7
2. armrest width
024543_AC_Shoprider_V2.qxd 4/3/08 11:30 AM Page 9