8
ADJUSTMENTS
Armrest Angle Adjustment (Fig. 1)
Flip up the armrests to allow access to the
adjusting wheel located under the armrest
wind the adjusting wheel
(Fig. 2)
in a either
clockwise or anti clock direction to adjust the
armrest up or down.
Do not use the scooter without the arms
being fitted.
Seat Slide & Swivel Adjustment (Fig. 3)
Pulling up on the seat slide lever allows the
seat position to be adjusted forward or
backward. Release the lever and the seat
will lock in that position. Under the right
side of the seat there is a spring loaded red
lever. Pulling up on the lever allows the seat
to swivel, when released the seat will lock
into one of 3 positions.
Seat Removal (Fig. 4
)
Fold down the back of the seat. Pull up the
swivel seat adjustable lever (fig. 3) and lift
seat off.
Seat Height Adjustment (Fig. 4)
Remove seat as described above. Loosen
seat tightening bolt by hex key wrench.
Remove the locking pin that secures the seat
adaptor. Lift the seat adaptor out of the seat
post. The seat height can be adjusted to 3
different settings by inserting the steel locking
pin in the required hole. Retighten the bolt and
replace the seat.
Fig. 2
Swivel Seat
Adjustable Lever
Seat Slide
Lever
Fig. 3
Seat Tightening
Bolt
Seat Locking Pin
Seat Adaptor
Fig. 4
Fig. 1
Adjusting
Wheel
