13
GMP
ISO9001
ISO14001
ISO13485
CERTIFIED
FREEWHEEL LEVERS
The Powerchair will not function while the drive mechanism is disengaged (in freewheel).
Both left and right sides must be in drive mode for power chair to operate. Otherwise the
Powerchair motors will spin, but the unit will not move, until both freewheel levers are
engaged. Unit will spin in circles if only one side is in drive mode.
*** DO NOT PUT INTO DRIVE MODE WHILE MOTORS ARE SPINNING ****
The drive/freewheel levers are found toward the rear of the Powerchair (Fig.2). These
levers will allow you to disengage the drive mechanism (When the levers are
pulled out
away from the unit) the Powerchair is in freewheel mode. ***
NOTE
*** the nVSI will not
work in Freewheel mode. When the levers are
pushed in
(towards the inside of the unit)
the motors are engaged and the powerchair is in drive mode.
Sticker will also help indicate in which
position the brakes are locked or unlocked.
Fig. 2
Freewheel Lever