14
The Powerchair will not function while the drive
mechanism is disengaged (in freewheel).
Both left and right sides must be in drive mode for power chair
to operate. Otherwise the Powerchair motors will spin, but the
unit will not move, until both freewheel levers are engaged. Unit
will spin in circles if only one side is in drive mode.
*** DO NOT PUT INTO DRIVE MODE WHILE MOTORS ARE
SPINNING ****
PUMA 10
–
The drive/freewheel levers are found toward the rear of the Powerchair,
both have yellow colored handles. These levers will allow you to
disengage the drive mechanism (When the levers are
pulled out
away
from the unit) the Powerchair is in freewheel mode. ***
NOTE
*** the VSI
will not work in Freewheel mode (See fig. on bottom) When the levers
are
pushed in
(towards the inside of the unit) the motors are engaged
and the powerchair is in drive mode.
Free wheel lever **
NOTE
** There is a lever on opposite side
FIGURE 4
ooppte
side
Sticker will also help indicate in which position
the brakes are locked or unlocked.
PUMA 14HD
