Shoprider Sena 888WNLS, User Manual

Disassembly & Assembly 

Warning: We advise caution when disassembling and lifting items. You 
must ensure that the person undertaking the action is able to safely and 
correctly handle the weight to avoid any personal injury. 
 
Ensure that the power is switched off and the joystick is dis-connected 
before dismantling. 

 
Method:

 
Step 1:  

Remove the seat assembly by folding it forward as mentioned previously. 
Undo the two hand knobs just under the front of the seat, the seat should now 
freely lift from the chassis. You can remove the armrests to make the seat 
easier to handle. 
 

Step 2:  

Remove the footplate by removing the locking pin and simply pulling the 
footplate away from the frame. 
 

Step 3: 

Remove the four seat support brackets after removing the locking pins. 
 

Step 4: 

Remove the shroud by gently lifting it away from the retaining Velcro. 
 

Step 5: 

There are two locking pins situated at the 
bottom of the frame behind the centre drive 
wheels. 

Locking Pins 

 
Undo the security loop on the pin and remove 
the pins. The front chassis will now be able to 
be lifted away from the rear part. 

 
 
 
 
 
Step 6: 

Unplug the batteries and remove them from the rear chassis. 

Take care when lifting the batteries as they are heavy.  

Assembly is the reverse of the above procedure. 

11