MOUNTING
Make sure your Venice Powerchair is on level ground.
Seat yourself in the Power chair. The footrest can be folded up in order to position
you closer to the seat to facilitate easier seating. Once seated, fold the footrest down
with either your heal or hand.
The foot rest height on your Venice can be adjusted by removing the pin and fitting
it into a new slot and replacing the pin.
The armrests of your Venice powerchair can adjust up and down using the knob at
the back of the rest. Note there are set adjustments to suit your requirements. The
armrests can also be adjusted in and out to meet your comfort requirements.
The seat of the Venice powerchair also has a lever to adjust the angle of the back
rest. Please note that leaning back can take some weight off the front wheels and
when approaching a bump you should always be in the most upright position
possible. Bearing this in mind please adjust you back rest sitting in the most upright
position which is comfortable.
Now that you are comfortable turn the controller on, by pressing the top green
power button (the lights on the battery indicator will glow, indicating it is ON). See
Diagram below.
Set the speed to slow by pressing the left speed button (the lights will show only
one bar glowing).
DISMOUNTING
Ensure that your Venice Powerchair has fully stopped.
Turn the controller OFF by pressing the top green power button (indicated below)
You can now dismount from the seat. The footrest can be folded back to facilitate
easier dismounting.
SHOPRIDER AUSTRALIA PAGE # 1
