background image

{13}

Shor-Line     |     800.444.1579     |    

 www.shor-line.com

;

Section 9: Services, Terms & Conditions, & Warranty

 

{Terms & Conditions} 

ORDER & ACCEPTANCE By submitting an order for the products described herein, Buyer shall have agreed to 

purchase the products subject to all Seller’s terms including these TERMS and CONDITIONS. Buyer’s order is 

subject to and effective only upon acceptance and approval at Seller’s offices in Kansas City, Kansas as evidenced 

by Seller’s issuance of an Order Acknowledgement or Invoice. Processing of an order shall not commence until 

receipt of any applicable deposit and all required paperwork and customer sign-offs. The resulting contract shall be 

deemed made in Kansas and shall in all respects be governed and interpreted according to the laws of the State of 

Kansas. Buyer also consents to the jurisdiction of Kansas courts over any dispute involving this order.

ENTIRE AGREEMENT This order as accepted and approved by Seller constitutes the entire final agreement between 

the parties. Except as otherwise provided in writing by Seller, the terms set forth herein constitute the sole TERMS 

AND CONDITIONS for Buyer’s order. Seller’s acceptance of Buyer’s order is expressly conditioned on Buyer’s 

assent to these TERMS AND CONDITIONS which may not be supplemented, modified, superseded or otherwise 

altered except as authorized in writing by Seller. Any different, conflicting or additional terms in Buyer’s purchase 

order or any other document of Buyer are rejected and Seller’s TERMS AND CONDITIONS shall prevail.

TERMS OF PAYMENT Unless otherwise expressly specified by Seller in writing, payment shall be due 30 days from 

the date of invoice, payable in U.S. Funds. Seller reserves the right to negotiate terms or orders of any unique or 

special nature and may require full or partial payment in advance in its sole discretion. Acceptance of all orders and 

the payment terms for such orders are subject to approval by Seller’s Credit Department. Seller may decline to make 

any shipment or perform any work except upon terms satisfactory to said Department. A charge of 1½% per month 

(or the highest monthly interest rate that may be imposed under applicable law) will be imposed on overdue accounts. 

Buyer will be liable for all expenses (including reasonable attorneys’ fees) incurred in collecting any overdue 

accounts.

PRICES & QUOTES Prices on products specified herein are F.O.B. Seller’s factory unless otherwise specified in 

writing and are exclusive of any city, state, local or federal tax. Prices are subject to adjustment without notice and 

Seller reserves the right to correct errors in prices or specifications. Any quotation (whether written or oral) is not an 

offer to contract or acceptance of an order. Similarly, neither a price list nor a catalog constitutes an offer to sell or 

contract, but are provided solely for customers’ convenience. 

TAXES Any sales, use, property, or other taxes or duties which Seller may be required to pay or collect (under any 

existing or future law) in connection with the sale, purchase, delivery, storage, processing, consumption or use of the 

products purchased herewith shall be for the account of Buyer and Buyer shall promptly reimburse Seller therefore.

DELIVERIES Delivery dates are estimates only and time shall not be of the essence unless specifically provided by 

Seller in writing. Seller will not have any liability for loss or damage resulting from a delay in a scheduled delivery or 

for non-delivery resulting from labor trouble, part or material shortages, accident, fire, war, strike, natural disaster, 

carrier delays or any contingency whatsoever (whether of the same class of those enumerated or otherwise) beyond 

its reasonable control. Buyer assumes all freight, handling and installation costs and the risk of loss or delay in transit. 

Seller will assist Buyer with transit arrangements, but Seller shall be free of any liability in connection therewith. Title 

to all materials and products sold by Seller shall pass to Buyer upon delivery to the carrier and Seller’s responsibility 

ceases at that time. Risk of loss, injury, or destruction of the products shall be borne by the Buyer and any such loss, 

injury or destruction shall not release Buyer from payment of the purchase price.

INSPECTION Buyer must inspect all materials for shortages, damages, conformity with order and defects before 

signing any documentation requested by the carrier. Buyer must immediately complete such inspection and shall 

not accept delivery of goods that are damaged or not in accordance with the bill of lading or packing slip without 

proper notification to the carrier and Seller. If goods are damaged, defective, shorted or appear not to conform to 

the order, Buyer shall discontinue their use and immediately notify the carrier and Seller of such condition and afford 

a reasonable opportunity to inspect the same. Buyer shall make, or provide Seller in writing with all information 

necessary to make, a claim against such carrier for any shortage, damage, or discrepancy of the shipment within 

fifteen (15) days after receipt of the goods. Claims or written information thereon not so presented within fifteen 

(15) days after receipt of the goods will not be allowed. No products will be taken back and credited or replaced 

unless arrangements for their return have been made in compliance with Seller’s Return Policy stated below. SEE 

SELLER’S CATALOG FOR INFORMATION ON HOW TO FILE A FREIGHT CLAIM.

Summary of Contents for BLUE-LINE RLT

















Reviews: