background image

{14}

;

PRODUCT SATISFACTION In the event Buyer is not fully satisfied with the quality or workmanship of a product 

purchased hereunder, Seller in its sole discretion may arrange either to credit Seller’s account (excluding shipping 

and handling costs) or replace the product. However, Buyer must notify Seller in writing of its dissatisfaction within 

fifteen (15) days of receipt of the product from Seller and immediately discontinue its use. Buyer also must return the 

rejected product to Seller freight paid within thirty (30) days of its receipt in compliance with Seller’s Return Policy 

stated below. Seller’s obligation is limited to providing the applicable credit or product replacement, which will be 

processed only after receipt of the retuned product. In addition, this Product Satisfaction policy does not apply to 

specially designed, discontinued, used, factory second or repaired products.

LIMITED WARRANTY Seller warrants to the initial purchaser only of products manufactured by it that such products 

are free from defects in materials or labor for varying periods depending on the particular product and subject to 

the limitations and conditions set forth herein. Seller’s stainless steel products are warranted to be free from such 

defects for their normal useful life. Seller’s mechanical and electrical products, parts, devices and components 

(including such parts, devices and components of stainless steel products), and other-non-stainless steel products 

are warranted to be free from such defects for only one year. Seller disclaims any express or implied warranty for 

products not manufactured by Seller and the only warranty available therefore to Buyer is that offered by the products’ 

manufacturers.

The warranty period shall run from the date of delivery to Buyer. If within the applicable warranty period a product 

proves to be defective as described herein, Seller will repair or replace the product, at Seller’s sole discretion, 

conditional upon Buyer’s written notice of the defect within fifteen (15) days after its discovery. Upon receipt of 

Buyer’s notice including substantiation of Buyer’s status as the initial purchaser and details of the defect, Seller 

shall advise Buyer whether it plans to repair or replace the product. Seller’s obligation is solely limited to repair or 

replacement of a defective product and in no event shall Seller be liable for transportation from or to Seller’s offices 

or any other expense which may arise in connection with this Limited Warranty or the aforementioned Product 

Satisfaction policy.

SELLER MAKES NO OTHER WARRANTY OR GUARANTEE OF ANY KIND WHATSOVER, WHETHER EXPRESS 

OR IMPLIED, STATUTORY OR OTHERWISE INCLUDING, BUT NOT LIMITED TO IMPLIED WARRANTIES OF 

FITNESS, AND/OR MERCHANTABILITY. THE ABOVE LIMITED WARRANTY CONSTITUTES SELLER’S ONLY 

WARRANTY AND NO PERSON OR ENTITY IS AUTHORIZED, ON BEHALF OF THE SELLER, TO MODIFY OR 

EXPAND UPON THE PROVISION EXPRESSED IN THIS PARAGRAPH NUMBER NINE. THE SELLER’S LIABILITY 

UNDER THIS LIMITED WARRANTY SHALL BE LIMITED AS PROVIDED FOR ABOVE AND THE FOREGOING 

SHALL BE THE BUYER’S SOLE REMEDY AND RECOURSE UNDER THIS CONTRACT. There are no warranties 

which extend beyond the description on the face hereof and goods are sold as is. Seller’s Limited Warranty is only 

available to the initial purchaser of its products and is effective only upon compliance with the terms set forth herein.

Buyer agrees that the products subject to this Limited Warranty will be properly maintained in the ordinary course 

of business. Buyer agrees to comply with all instructions and specifications furnished by Seller relating to the 

installation, care, use and application of products purchased. Buyer agrees that it will not modify, misapply, or misuse 

such products in any manner which would deviate from Seller’s instructions. Any repairs, alterations or service 

provided by parties other than Seller, or its authorized representative, may void this Limited Warranty. This Limited 

Warranty shall not apply to normal wear and tear, improper or insufficient maintenance, routine maintenance, or 

damage caused by accident, negligence, improper operation or the use of corrosive materials (including without 

limitation bleach or sodium hypochlorite used on stainless steel surfaces). THE SELLER’S LIMITED WARRANTY 

MADE IN CONNECTION WITH THIS SALE SHALL NOT BE EFFECTIVE AND SHALL BE VOID UNLESS SUCH 

GOODS ARE APPLIED AND USED IN ACCORDANCE WITH SELLER’S INSTRUCTIONS.

LIMITATION OF LIABILITY UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE TO BUYER OR 

ANY OTHER PERSON FOR ANY SPECIAL, LIQUIDATED, INCIDENTAL OR CONSEQUENTIAL DAMAGES, 

INCLUDING, WITHOUT LIMITATION, DAMAGES BASED UPON LOST GOODWILL, LOST SALES OR PROFITS, 

WORK STOPPAGE, DELAY, PRODUCT FAILURE, IMPAIRMENT OF GOODS OR OTHERWISE AND WHETHER 

ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE OR OTHERWISE, and 

in any case, Seller’s liability for any and all losses and damages sustained by Buyer and others, rising out of or by 

reason of this contract, shall not exceed the original purchase price of the products upon which liability is founded.

IN NO EVENT SHALL ANY ACTION BE COMMENCED AGAINST THE SELLER MORE THAN ONE YEAR AFTER 

THE CAUSE OF ACTION WITH RESPECT TO WHICH THE CLAIM IS MADE HAS ACCRUED. SELLER SHALL 

NOT BE RESPONSIBLE FOR EXPENSES FOR REPAIRS NOT MADE BY SELLER WITHOUT THE PRIOR 

WRITTEN CONSENT OF SELLER.

Summary of Contents for BLUE-LINE RLT

















Reviews: