27
Step 4
Press the custom key to the left of the function you would
like to assign to this key.
NOTE
Many functions can be assigned to your custom buttons by your
system administrator via ShoreWare Director. However, your
choices are limited to just
Call Appearance
and
Dial Number
(i.e.
Speed Dial) when programming the buttons via the 212k
interface. To program one of the other functions to your custom
buttons, please contact your system administrator.
Step 5
Enter the extension, if applicable, and press the custom key
next to
Enter
. If you are entering an external number, note
that it must be entered in canonical format – this means you
must enter a
+
symbol, followed by a
1
, and then the 10-digit
number. For instance, to call a U.S. number: +14085551212.
Step 6
You can enter a label up to six characters long by pressing
the custom key next to
A -> a1
(this shifts the key pad to
alphabet mode).
NOTE
When in alphabet mode, press the appropriate key on the dial pad
multiple times to scroll through the alphabet letters associated
with that key. Example: For the letter ‘C’ you would press the #2
digit three times on the dial pad.
Step 7
Press the custom key next to
Enter
when finished.
Step 8
Press the Menu button
to exit.
Only Call Appearance and Dial
Number (i.e. Speed Dial)
functions are available from the
phone interface. Contact your
system administrator if you want
access to other programmable
button functions.
The word “Call” toggles with
the word “Appearance” due
to limitations on the number
of characters that can be
displayed.
