Communicator for Mobile
Configuring Settings
1
ShoreTel 14.2
18
Setting Call Handling Mode
The active Call Handling Mode determines the handling of inbound calls. One mode is always active.
To configure and specify the current Call Handling Mode:
1.
Navigate to the Main Menu and select
Settings
. The Settings menu appears.
2.
Scroll to and select
Call Handling Mode
s. The Call Handling Mode page appears.
lists
and describes the call handling modes.
QuickDialer
Allows you to enable Personal Information Management
(PIM) on your mobile device. This feature allows the address
book on your mobile device to integrate with the contact
directory in the ShoreTel Directory when the device connects
to the ShoreTel extension.
PIM is supported on all devices except the RAZR V3xx and
Windows Mobile devices.
Language
Allows you to change the language used by the ShoreTel
Communicator for Mobile application on your device.
Keyboard
Allows you to change the keyboard mapping between your
mobile device and the application for devices that have a full
keyboard.
User Information
Lists ShoreTel connectivity information that the device uses.
About ShoreTel Communicator
Provides version information about the ShoreTel
Communicator for Mobile software installed on your mobile
device.
Reset
Allows you to clear the current setup information on the
device. You should not use this option under normal operating
conditions. To use ShoreTel Communicator for Mobile after
resetting, you must repeat the initial setup procedure as a
first-time user.
If you use the same extension number to set up the
application, your settings (Extension Assignments,
Waypoints, etc.) are retained on the server and will be
available after you set up the application.
Table 5: Call Handling Mode Options
Element
Description
Standard
Activates system-wide call handling.
In a Meeting
Activates the message that the recipient is in a meeting and passes the caller to
voice mail.
Table 4: Settings Page Configuration Options
Element
Description
