Communicator for Mobile
Configuring Settings
1
ShoreTel 14.2
21
Options include:
Setting the Polling Rate
Enabling/disabling GPS Services
Enabling/disabling Bluetooth Services
Enabling/disabling Connect Device(for Bluetooth only)
There are separate icons for GPS and Bluetooth services. When these services are enabled, one or
both of these icons appear on the top right hand corner of the ShoreTel Communicator for Mobile Main
Menu page. These icons indicate activity and Bluetooth and GPS reception.
Setting the Polling Rate
The polling rate specifies the conditions under which the device searches for a GPS or Bluetooth
signal. The polling rate must be configured before LBS is enabled.
Two polling conditions are defined as:
On Use.
The default setting. This setting has the smallest impact on device battery life. An On Use
interrupt is an event that enables ShoreTel Communicator for Mobile as the foreground
application, either when you access any ShoreTel Communicator for Mobile function or move
ShoreTel Communicator for Mobile to the foreground. In this case, ShoreTel Communicator for
Mobile polls for location routing coordinates after the event.
Periodic Intervals.
You can configure ShoreTel Communicator for Mobile to poll once every 5,15,
30, or 60 minutes. This option can significantly affect the battery life of your device.
Setting or changing the polling rate
1.
Launch the ShoreTel Communicator for Mobile application and navigate to the Main Menu.
2.
Select Settings. The Settings page appears.
3.
Select
Location
Routing. The Location Routing page appears.
4.
Highlight
Polling Rate
and click the appropriate key on your device to display the drop-down
menu.
5.
Select the rate that you want the device to scan for a GPS or Bluetooth signal.
6.
Press the
Return
key on your device or navigate to the next page to save the configuration.
Note
This feature is not supported on RazrV3xx, Windows Mobile, and BlackBerry 8100 devices.
