4 . Spe c ific a tions :
Voltage: AC90-240V 50-60Hz
Power: 90W
Led source: 7pcs high brightness 10W CREE white LEDs
Beam angle: 5-40° Strobe: 1-25 Hz
Dimmer: 0-100% linear dimmer with 16 bit without strobe
Pan: 540°+ fine Tilt: 250°+ fine
Color: With a 6 colors wheel to create colorful effect.
Channel: 12/19 DMX double channels mode
Control: DMX512/Master-slave/Auto/Sound activated
Function:
1. Strong beam light effect, beam angle is optional, beam light with macro effect.
2. Each bulb is controllable, with racing light effect.
3. B-eye designed Lens can rotate without limitation to create dynamic and
amazing effect. Can separate to colorful beams or gather to one strong beam.
4. Perfect beam light and effect light for disco, club, show, etc.
5. Smaller size but excellent effect to make installation as easy as you can
imagine.
5 . Installation instruction:
Cautions:
For added protection mount the fixtures in areas outside walking paths,
seating areas, or in areas were the fixture might be reached by
unauthorized personnel.
Before mounting the fixture to any surface, make sure that the installation area can
hold a minimum point load of 10 times the device
’s weight.
Fixture installation must always be secured with a secondary safety attachment, such
as an appropriate safety cable.
Never stand directly below the device when mounting, removing, or servicing the
fixture.
From a ceiling, or ser on a flat level surface (see illustration below). Be sure the fixture
is kept at least 0.5 m away from any flammable materials.
Always use and install the supplied safety cable as a safety measure to prevent
accidental damage caused by the clamp fails.
.4.
7 . Control Panel Menu Instruction
Menu Panel
Function
d
Set the DMX address
To choose the channel mode
Pan auto Run
Tilt auto Run
LENS auto Run
Color wheel auto Run
Auto Run mode 5
Sound activated mode
Pan reverse movement
Pan forward movement
Tilt reverse movement
Tilt forward movement
Display reverse 180
°
Display forward 180
°
Pan movement by manual control
Tilt movement by manual control
LENS rotation by manual control
Color wheel rotation by manual control
Hall Real-time status
number
Pan sensor Real-time status
number
Tilt sensor Real-time status
number
Fixture working time
Software version
Reset on
Reset off
.7.
