SPEED 1, then release and instantly re-press run button. The
cow or flag will now travel at SPEED 2.
NOTE: When you stop, the unit automatically resets to
SPEED 1.
NOTE: If the unit fails to shift to SPEED 2, double-click
was not fast enough. User only has 100
milliseconds to cause speed change.
6. REMOTE CONTROL:
The remote control can be worn in a variety
of ways depending on comfort and convenience. The most common
method is to strap the control pouch to your preferred wrist, and strap
the button assembly to your index (pointer) finger. The riders thumb
is then used to operate the run buttons.
7.
PRACTICE:
Attach remote control to your wrist by inserting your
hand through Velcro loop on pouch. Attach switch plate to index
finger and rotate buttons so they can be pushed by your thumb. Walk
to center of arena and practice operating machine. Make any
necessary adjustments. Once comfortable with the controls, you are
ready to introduce your horse to the Pro Cutter. We recommend
working at slow speeds until both horse and rider are acclimated.
ADDITIONAL FEATURES:
* Soft-start acceleration: Progressive acceleration ramp
* Superior radio system: Better range, less interference.
* Large drive system: Heavy-duty industrial components
* Weather-tight NEMA enclosure
*Dynamic braking
Thank you for choosing............
SHOW PRO INDUSTRIES
P.O. Box 1235, Springtown, TX 76082 / (817)523-4055 / (817)220-5117 fax
email: showpro@flash.net / www.procutter.com
