14
Ordercode: 41268
Pixel Bar 4 COB
Main Menu Options
DMX address
Master-Slave
Manual Color
Built-in Programs
Auto run
1. DMX Addressing
With this menu you can set the DMX address.
01)
Press the
MODE
button, until the display shows
.
02)
Press the
SETUP
button to open the menu. You can choose 512 different DMX addresses.
03)
Press the
UP
/
DOWN
buttons to select the required address from
.
04)
Once you have set the desired DMX address, you can also choose the desired DMX channel mode.
05)
Press the
SETUP
button to set 5 different DMX modes. Press the
UP
/
DOWN
buttons to choose between
2, 3, 5, 6, or 12 channels.
2. Slave Mode
With this menu you can set the device as a master or slave.
01)
Press the
MODE
button, until the display shows
.
02)
If the device has not been set to slave, it is automatically classified as a master device. All slave
devices will follow the master’s movement.
03)
If the device has been set to slave, it will react the same as its master device.
3. Manual Color
With this menu you can manually set a desired color.
01)
Press the
MODE
button, until the display shows
.
02)
Press the
SETUP
button to open the menu.
03)
Press the
SETUP
button to scroll through the 3 color options.
04)
Press the
UP
/
DOWN
buttons to change the values.
Set the brightness of the red LEDs (0-255)
Set the brightness of the green LEDs (0-255)
Set the brightness of the blue LEDs (0-255)
05)
You can combine Red, Green and Blue to create an infinite range of colors (0-255).
