INSTALLATION INSTRUCTIONS
FOR THE LINEA TOUCH AND GLIDE PIVOT DOOR ENCLOSURES
Issue 1 - 07/11
IMPORTANT - PLEASE READ
●
Please read these instructions carefully before assembly and installation.
●
If installing with Side Panel please also read the side panel instructions carefully
before assembly and installation.
●
Please note that this is a dual Installation Instruction for both the Linea Touch and
Glide product type. Linea Touch is the product type shown throught this Instruction.
When installing the Glide product please fit the Glide handle were supplied.
●
Please inspect immediately upon receipt for damage that may have been caused in
transit. Please examine all exposed glass edges and corners prior to assembly,
damaged edges can cause spontanious breakage during product life time.
●
Damage reported later cannot be accepted.
●
Please assess the weight of this product prior to assembly and installation. Seek
assistance should you require it.
●
Before installation, you must ensure that the shower tray is level in all directions and
completely sealed to the tiles.
●
This product must only be fitted onto tiled or waterproof surfaces.
●
The wall plugs and screws supplied are for use on solid walls and floors only. Any
other surface will require alternative fixings.
●
The enclosure when fitted, must not overhang the front of the tray.
●
Please leave this instruction leaflet with the customer.
SL634
