Showgear 50667, User Manual

12 

PSA-125A4C 

Product code: 50667 

Schematic Overview 

Fig. 05 

5.

Setup and Operation 

Warnings and Precautions 

Attention 
Connect all cables before supplying power. 
Disconnect power supply before connecting or disconnecting cables. 

Safety Instructions for Operation 

Attention 
This device must be used only for the purposes it is designed for. 

This device is intended for professional use as a 3-phase power distribution unit in theaters, entertainment 
facilities, public venues, and similar. It is suitable only for indoor use. This device is not suitable for 
households and residential buildings. 

This device is designed for use in environment B. 

Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use. 

Attention 
Power supply 

Before connecting the device to the power supply, make sure that the current, voltage and frequency 
match the input voltage, current and frequency specified on the information label on the device. 

Do not use the residual-current device or the circuit breakers as an on/off switch, to switch on the 
devices connected to the outputs. Switch these devices on only after you have set the residual-current 
device and all the circuit breakers to ON position.