Showgear 50667, User Manual

6 

PSA-125A4C 

Product code: 50667 

Attention 
General safety 

●

Do not shake the device. Avoid brute force when installing or operating the device. 

●

If the device is dropped or struck, disconnect the device from the electrical power supply 
immediately. 

If the device is exposed to extreme temperature variations (e.g. after transportation), do not switch it 
on immediately. Let the device reach room temperature before switching it on, otherwise it may be 
damaged by the formed condensation. 

If the device fails to work properly, discontinue the use immediately. 

Attention 
For professional use only 
This device shall be used only for the purposes it is designed for. 

This device is intended for professional use as a 3-phase power distribution unit in theaters, entertainment 
facilities, public venues, and similar. Any incorrect use may lead to hazardous situations and result in 
injuries and material damage. 

●

This device is not suitable for households and residential buildings. 

This device does not contain user-serviceable parts. Unauthorized modifications to the device will 
render the warranty void. Such modifications may result in injuries and material damage. 

Attention 
Before use, examine the device visually for any defects. 

Make sure that: 

All screws used for installing the device or parts of the device are tightly fastened and are not 
corroded. 

There are no deformations on housings, fixations and installation points. 

The power cables are not damaged and do not show any material fatigue. 

Attention 
Do not expose the device to conditions that exceed the rated IP class conditions. 

This device is IP20 rated. IP (Ingress Protection) 20 class provides protection against solid objects greater 
than 12 mm, such as fingers, and no protection against harmful ingress of water.