10
PSA-16A3C
Product code: 50660
4.
Installation
Safety Instructions for Installation
WARNING
Incorrect installation can cause serious injuries and damage of property.
Installation must be carried out only by instructed or skilled persons.
Follow all applicable European, national and local safety regulations concerning electrical installations.
Attention
Make sure there is enough space for ventilation around the device.
Installation Site Requirements
●
The device must be installed only indoors.
●
The device can be placed on a flat surface or mounted in a standard 19-inch rack.
●
The maximum ambient temperature t
a
= 35 °C must never be exceeded.
●
The relative humidity must not exceed 50 % with an ambient temperature of 35 °C.
Rack Mounting
The device can be mounted in a standard 19-inch rack. The device requires 2 rack units (RU) of space.
1 rack unit is 44,45 mm high.
Make sure that the rack is sufficiently secured to prevent it from becoming unstable or falling over.
To mount the device in a two-post rack, follow the steps below:
01)
Insert 4 cage nuts in the openings on the rack posts where you want to mount the device.
02)
Position the device in front of the rack posts so that the 4 mounting openings on the flanges face the
openings on the rack posts with cage nuts.
03)
Using a screwdriver, mount the device to the rack posts with 4 screws.
Summary of Contents for PSA-16A3C
Page 16: ...2021 Showgear...
