Unpacking
Carton Contents
• Electric log splitter
• Lifting handle
• Supporting leg
• Bolts, nuts and washers (4 sets)
• Manuals and registration card
1. Carefully remove the log splitter and check to see that all
of the above items are supplied.
2. Inspect the product carefully to make sure no breakage
or damage occurred during shipping. If you find damaged
or missing parts, DO NOT return the unit to the store.
Please call the Snow Joe
®
+ Sun Joe
®
customer service
department at 1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric log
splitter. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils, or
small parts. These items can be swallowed and pose a
suffocation risk!
Assembly
m
WARNING!
Do not connect to the power supply
until assembly is complete. Failure to comply could result in
accidental starting and serious personal injury.
m
WARNING!
The product must be fully assembled
before operation. Do not use a product that is only partially
assembled or assembled with damaged parts.
NOTE: Before using the log splitter, follow these instructions to
assemble the lifting handle and the supporting leg.
1.
Place the lifting handle on the supporting leg, fix them
together with the provided bolts, nuts and washers.
Tighten securely (Fig. 1).
2. Attach the leg with handle assembly on the bottom of the
log splitter, secure with the other 2 sets of bolts, nuts and
washers. Tighten securely (Fig. 2).
Fig. 1
Supporting leg
Lifting handle
Nuts
Bolts
Washer
Washer
Nut
Leg with handle
assembly
Fig. 2
Bolts
Washers
6
