4
Installation / Hanging mounting
The installation may only be carried out by authorised specialist personnel!
In case of overhead rigging, please observe the applicable standards and regulations in your
country. In any case, a second independent suspension must be used to secure the unit.
This can be ensured by a safety net or a suitable safety rope/chain or similar.
When mounting the unit on a stand, its secure stand and compliance with its maximum load
must be ensured.
Fire hazard
Do not attach the product to flammable materials. Do not cover ventilation slots and do not
operate the product above 40°C ambient temperature. Use the attached holding device for
mounting.
Keep a safety distance of at least 50cm to all other surfaces. Maintain a minimum distance of
at least 50cm between the light emission and the illuminated area. Keep liquids, moisture
and inflammable materials away from the product.
High light intensity
High light intensity can cause visual damage. Do not look directly into the light source.
Epilepsy
Flashing light can cause epileptic seizures. People who are sensitive to flasing light should
avoid exposing themselves to flashing light and refrain from looking directly at the light
source.
Place
Do not expose the product to the following conditions to avoid deformation, discoloration or
major damage:
Direct sunlight, extreme temperature or humidity, excessively dusty or dirty place, strong
vibrations or shocks, strong magnetic fields
Cleaning
Clean the product only with a soft, dry cloth. Do not use paint thinner, solvents, cleaning
fluids or chemically impregnated wipes.
Handling
Do not exert excessive force on operating elements such as switches, knobs, buttons, and
fastening screws.
Do not insert any paper, metal or other objects inside. If this happens, unplug the AC
adapter/power cord from the wall outlet. Have the product checked by qualified service
personnel.
