SHOWTEC 75132, Manual

3 

Order code: 75132 

Multigrip Clamp 

●

All clamps should be visually inspected before use. In the event of any damage, the clamp should 
be taken out of service and returned to an approved Showtec dealer for inspection. 

●

Avoid contact with water or other liquids. 

●

Only operate the device after having familiarized with its functions. 

●

Only move a load, after having made sure that the load is safely and correctly attached and that 
there are no persons within the immediate vicinity of the hoist and/or the load. 

●

Only use the clamp with tubes of the recommended gauge (10–55 mm). 

●

Avoid flames and do not put close to flammable liquids or gases. 

●

Make sure that the device is not exposed to extreme heat, moisture or dust. 

●

If device was dropped or struck, discontinue the use of the device. Have a qualified engineer 
inspect for safety before operating. 

●

If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely 
(preferably in the original packing material), and return it to your Showtec dealer for service. 

●

It is not recommended to use clamps which do not fully encompass the tube for overhanging. 

●

For adult use only. The device must be installed beyond the reach of children. 

●

For semi-permanent installation applications, check integrity of welds, joints and clamp’s tightness 
weekly. 

●

The user is responsible for correct positioning and operating of the clamp. The manufacturer will not 
accept liability for damages caused by the misuse or incorrect installation of this device. 

●

Applications that are not described in this manual, are not allowed. 

●

Installation, repairs and servicing must be carried out by a qualified technician. 

●

WARRANTY: Till one year after date of purchase. 

Operating Determinations 

●

This device is not designed for permanent operation. Consistent operation breaks will ensure that the 
device will serve you for a long time without defects. 

●

If this device is operated in any other way than the one described in this manual, the product may 
suffer damages and the warranty becomes void. 

●

Any other operation may lead to serious damage and/or severe injuries. 

You endanger your own safety and the safety of others! 

 
Not permitted use 
Please note, that when an application is not included in this list, it does not mean that the use of the 
Multigrip Clamp is allowed. When in doubt, consult your Showtec dealer. 
 
List of applications which the Multigrip Clamp is not allowed to be used for: 
●

Transport of people 

●

"Pulling loose" of jammed loads 

●

Welding on the clamp 

●

Hoisting or transporting of loads, if there is anybody within the range of the load 

●

Staying under a suspended load 

●

Prolonging of (unattended) loads in a raised position 

●

Using the clamp in a potentially explosive atmosphere 

Rigging 
Please follow the European and national guidelines concerning rigging, trussing and all 
other safety issues. 

Do not attempt the installation yourself! 
Always have the inspections carried out by an authorized dealer!