7
Order code: 75132
Multigrip Clamp
CAUTION
The maximum load capacity for the Multigrip Clamp is 25 kg.
Do not exceed this rating.
CAUTION
Do not use the Multigrip Clamp to lift people or to lift loads above people!
CAUTION
Tighten all screws manually!
Do not use any tools, in order to avoid the risk of over-tightening!
CAUTION
Do not use the Multigrip Clamp if it DOES NOT entirely encompass the mounting
surface it is installed on!
Installing the Multigrip Clamp onto a Tube/Truss
01)
Turn the mounting screw (01) counterclockwise, to loosen the jaw of the Multigrip Clamp.
02)
Mount the clamp onto a tube/truss.
03)
Make sure that the tube does not exceed the recommended tube size: 10–55 mm.
04)
Make sure that the Multigrip Clamp entirely encompasses the tube.
05)
Turn the mounting screw (01) clockwise, to tighten the clamp and fit it firmly to the tube/truss.
Fig. 04
06)
Install load(s) onto the Multigrip Clamp by means of the appropriate mounting points (M4, M6 or 16-
mm (5/8") hexagon socket). Make sure that the maximum SWL of the Multigrip Clamp (25 kg), as well
as of any other component, is not exceeded.
Summary of Contents for 75132
Page 14: ...13 Order code 75132 Multigrip Clamp Notes ...
Page 15: ...14 Order code 75132 Multigrip Clamp ...
Page 16: ... 2020 Showtec ...
