20
Creator Compact
Ordercode: 50729
8.4 Include a step
In the menu of editing chase, press the <Playback> button of the desired step to include the step data.
8.5 Global time
In Level 1 menu, press <Time>, then, press the desired chase for editing. Use the Menu Up/Down buttons
to select option and Wheel A/B to change value; Press <Enter> to confirm.
8.6 Delete a scene
In Level 1 of Programming Mode, press <Delete>, then, press the <Playback> button of the desired scene
twice to delete it.
8.7 Copy a chase
In Level 1 of Programming Mode, press the <Playback> button of the desired chase to copy, then, press
another <Playback> button to paste.
8.8 Run
Set the controller to Running Mode. Raise the fader, the corresponding chase on the current page will be
output.
If Chase triggered by fader
Press the corresponding <Playback> button, the chase will pause or play. If current step is link off, the
chase will pause until press the corresponding <Playback> button. While the chase is pause, the LED
of the corresponding <Playback> button will flash.
If Chase is not triggered
Hold the <Playback> button, the chase will playback. And after release, chase will close.