2.5 Running Chases
2.5.1 Manual Mode
2.5.2 Auto Mode
2.5.2 Auto Mode
2.5.3 Music Mode
4. Use the Bank Up/Down button to scroll through
the chase to run all banks of scenes.
26
25
2. Operation Guide
2. Operation Guide
You must program scenes before you can run chases.
1. When the power is turned on, this unit enters Manual mode automatically.
2. Select your desired chase by tapping one of the six Chase buttons. A second
tap of this button will deactivate this function.
2. Select your desired chase by tapping one of
the six Chase buttons. A second tap of this
button will deactivate this function.
3. Use the Speed slider(or Tap Sync) and Fade
Time slider to adjust the chase to your desired
effects.
You may select several chases at a time, the
chases will run in sequence that you select the
chases.
3. Use the Fade Time slider to adjust the current scenes to your desired effects.
Auto/Del
Music/Bank Copy
Chase buttons 1-6
1. Tap the Auto/Del button to activate Auto mode.
A highlight next to "Auto trigger" will indicate
Auto mode.
1. Tap the Music/Bank Copy button to activate
Music mode. A highlight in the Segment
Display next to "Music trigger" will indicate
Music mode.
BANK
0
30S
SPEED
FADE TIME
10MIN
0.1SEC
