11
DMX512 ADDRESSING WITH ID ADDRESS (STAG MODE)
1)
Connect a DMX controller (example 50720 Showdesigner 1024) to the series of Spectral D4000„s.
2)
Each Spectral D4000„s has 11 DMX channels (DMX address LED Par #1=1, Par #2=12, Par #3=23,
Par #4=34, etc.).
3)
Any DMX address in the range from 001 to 512 may be used.
4)
Each DMX address may carry up to 66 separate ID addresses.
5)
The ID Address should be set in the SETTINGS menu, on each unit in ascending values (i.e. 1,2,3...).
6)
ID On should be set in the SETTINGS menu on each unit.
7)
ID addresses are accessible from CH11 on the DMX512 controller.
Showdesigner 1024 (
50720
)
Example 1
The figure above shows a simple DMX layout. All the Spectral D4000„s have different ID addresses which
allows the user to collectively control the whole group of Spectral D4000„s with the same DMX address by
setting CH11 to 0, or to control each Spectral D4000 independently by first selecting the DMX address
and then by using CH11 to locate the target ID address.
S howdesigner 1024 (
50720
)
Example 2
The figure above shows a simple DMX layout. All 3 Spectral D4000„s have different ID addresses, which
allows the user to collectively control a group of 3 Spectral D4000„s with the same DMX address by setting
CH11 to 0, or to control each Spectral D4000 independently by first selecting the DMX address and then
by using CH11 to locate the target ID address.
Summary of Contents for Spectral D4000
Page 1: ...Spectral D4000 IP67 ORDERCODE 43504 ...
Page 14: ...12 MENU OVERVIEW ...
Page 26: ...24 Beam Angles ...
Page 29: ......
