7
SHOWTEX INSTALLATION MANUAL
AUTOREVEAL 600
HOW TO INSTALL: SETUP A
STEP 1: REMOVING THE TOP & BOTTOM COVERS
STEP 2: ADJUSTING THE HEIGHT OF THE ROLLER
STEP 3: CONNECTING THE CABLES
STEP 4: HOW TO OPERATE
1: Loosen the butterfly locks on both sides of the flightcase.
2: Remove the top & bottom covers.
Remote control: rear view
1
2
Flightcase: front view
1: Connect the remote control and motor with the link cable.
2: Connect the remote control to a power supply.
1: Loosen the bolts on both sides of the case.
2: Lift (or lower) the roller and secure the bolts on both sides of the case.
2: Turn anticlockwise to roll up and clockwise to unroll.
1: Use the remote control to test & operate your reveal system.
in
out
Remote control: front view
1
2
Refer to the TDS for detailed info
about the minimum clearance.
230v
