8
SHOWTEX INSTALLATION MANUAL
AUTOREVEAL 600
1: Use the switches on the left-hand side of the motor to install the limit switches.
An arrow indicates the rotating direction of the roller. Make sure both switches
are set to 0.
2
1
1: Roll up the curtain, whilst keeping it well tensioned and straight.
2: Keep the curtain 0.5m out of the case, set the corresponding limit switch to 1.
STEP 5: ATTACHING THE CURTAIN TO THE ROLLER
STEP 6: RESETTING THE LIMIT SWITCHES
STEP 7: SETTING THE MAXIMUM UNROLLING POSITION
STEP 8: SETTING THE MAXIMUM ROLL-UP POSITION
1: Roll up the curtain 1.5 turn by operating the remote control.
2: Unroll 0.5 turn and set the corresponding limit switch to 1.
1: Turn the roller with hook fastener facing downwards.
2: Attach the reveal curtain to the roller using the hook & loop fastener system.
