background image

 Operation

 DMX Control

Check the machine and accessories, ensure it is in good status. Place the machine on a flat 

surface, tilting may result in inaccurate water level alarm.

Fill the liquid tank with FX-M Pro medium fog fluid. Please use original fog fluid from 

SHOWVEN, Warranty will be void if any other type fog fluid is used. 

Connect the machine to suitable rated power supply. Please ensure power supply meets the 

requirement. Always connect the machine to a protected circuit and ensure it is properly 
grounded.

Turn on the machine, it heat up automatically, and shows “WARMING UP” on LCD screen.

Water Tank Filling

Method 1:

Open the lid of“water filling port”, fill the water tank with pure water, please pay attention 
to the water level show on liquidometer, stop filling when it is reached the black line. Or until 
the water shortage alarm on LCD screen disappear. 

Method 2:

Use

φ

8 tubes connect with quick connector on machine, and the other end put into exterior 

tank, press MENU enter setup interface, find the “Auto Pump” and switch it in to ON status, 
press ENTER key to save the change. Machine will filling the inner water tank automatically, 
just keep the water in exterior tank is enough for the show. When not use exterior tank, 
please do set the “Auto Pump” to OFF status.

Once the machine has reached operating temperature, temp., fog output and fan speed 

will show on the screen, please adjustable it accordingly.

Press “+”to start making fog, press “ENTER”to stop.

To turn off the machine, please POWER OFF and unplug the power cable.

For transportation or not use for a long time, please remove the fog output pipe. Drain the 

remaining water from fog output nozzle.

SHOWVEN

 Creeper AQ mini Low Fog Generator USER MANUAL -5-

2 channel mode

Channel

Function

First Channel

CH1

Fog output: DMX VALUE 6-255, fog output from 1-100. As
volume increase, the denser the fog, the longer for dissipate.

Second Channel

CH2

Fan speed: DMX VALUE 6-255, fan speed from 1-100. As
volume decrease, the better the fog stick to the ground but
spread slower.

Summary of Contents for Creeper AQ mini











Reviews: