Applying Environment
Startup
Stop
Fly upward
Fly downward
Spin clockwise
Spin anticlockwise
Roll leftward Roll rightward
Pitch backward
Pitch forward
Startup the drone motors
pull the two remote control levers as
shown in the figure, and hold for 1-2
seconds to start the motors. After the
motors start, release levers and push the
levers to start flying.
Remote control
Drone
Control method
Stop the drone motors
Stop the drone motors after drone lands
to ground or other expected place,
repeat the operation above for 1-2
seconds, the motors will be stop. The
drone will have no reaction if you push
the levers after this operation. The motor
should be re-started if you want to play
again.
Push left control lever forward, the
drone ascends vertically. Pull left
control lever rearward, the drone
descends vertically.
Push left control lever rightward, the
drone spins clockwise. Push left control
lever leftward, the drone spins
anticlockwise.
Push right control lever forward, the
drone pitches forward. Pull right control
lever rearward, the drone pitches
backward.
Push right control lever rightward, the
drone rolls rightward. Push right control
lever leftward, the drone rolls leftward.
