26
/ 27
Common faults and trouble shooting
Malfunction
Reason
Trouble shooting
Treadmill cannot start
1. The plug hasn’t been connected
or the switch hasn’t been opened.
2. The over current protector of the
treadmill disconnected
3. The indoor over current protector
disconnected
4. Safety key disconnected
1. Insert plug or start the power
2. Change fuse or press the protector
button
3. Reset over current protector
4. Put safety key to right place
Treadmill belt slip
The belt hasn’t been tightened
Adjust the tightness of the belt ( see
maintenance guide)
Poly V-belt slip
The belt hasn’t been tightened
Adjust the tightness of the poly v
belt(see maintenance guide)
Treadmill isn’t in the center place
The degree of the roller balance
hasn’t been adjusted well
Adjust the belt to the rotating axis (see
maintenance guide)
The strange voice of treadmill
during exercise
The nut has loosen
Tighten relevant nuts
If your treadmill malfunctions are beyond the above please contact our service center or call us directly, we
promise that we would offer satisfying service to you.
If there are some worn spare parts, please immediately stop using the product. And continue to use it after
replacing it with original factory parts.
Equipment Warranty
Warranty Range:
Non human made damage caused during normal use and correct maintenance.
Warranty is owned by original purchaser, and cannot be transferred.
Term of service:
One year from the day of treadmill purchase.
The following statement cannot be included in the range of warranty:
The damage caused by users’ over usage, carelessness, accident or remold.
The damage caused by adjusting the bolt and driving belt wrongly.
The damage caused by abnormal maintenance.
Other damage caused by fault operation.
Summary of Contents for X6
Page 1: ...User s Manual ...
