If you are using a Switch that doesn’t not support DHCP, please change the default IP for TX
(192.168.1.11) and RX (192.168.1.12) manually.
Change your PC TCP/IP address to 192.168.1.8 for example, so as to have the PC and
TX/RX in the same domain.
Login TX to change default IP
A. Use a short cat5 cable to connect TX with the PC
B. Power on TX with 5V 2A adapter
C. Login TX on web browser with default IP: 192.168.1.11, user name: admin and password:
admin
D. Change the IP to 192.168.1.XXX (XXX can be 0 ~ 255 except 8, can’t be the same as the
PC Address)
Login RX to change default IP
A. Use a short cat5 cable to connect TX with the PC
B. Power on RX with 5V 2A adapter
C. Login RX on web browser with default IP: 192.168.1.12
D. Change the IP to 192.168.1.XXX (XXX can be 0 ~ 255 except 8, can’t be the same as the
PC Address)
Configure group ID for TX and RX
When doing point to many and many to many, it require the TX has unique group ID
，
RX can
have the same group ID in which case many RX will match one TX. We are using a 6 Bit DIP
switch or web browser to set up or change the group ID. When TX and RX are set with same
group ID, they get matched in the same group and the RX will display the source from the TX
in this group.
Firstly, we shall introduce how to configure the group ID by 6 Bit DIP switch.
