Operating Instructions
EDID Function
1).The default mode of this splitter is mix mode (0.0.0). This function applies to the situation when the
source’s HDMI Version exceeds the sink’s HDMI Version, it can be used to fix the deep color ,1080p ,1080i,
2ch audio, multi channel audio issue)
For example :When the TV is HDMI 1.2 version and PS3 Source is HDMI 1.,3 version, it will output HDMI 1.2
version.
2).When the DIP is in mode( 0,0,1) , the splitter will be in copy mode.
For example: When the source is HDMI 1.3, output1 can only support HDMI 1.2, then just set the DIP Switch to
copy mode (0,0,1), no matter whether other HDMI output ports which connected to the display supports HDMI
1.3 or not, it will output HDMI 1.2 signal.
3).When the DIP is in mode (0,1,0), all HDMI displays will output 2D signal and stereo audio.
4).When the DIP is in mode (0,1,1), all HDMI displays will output 2D signal and 5.1 audio.
5).When the DIP is in mode (1,0,0) ,all HDMI displays will output 2D signal and 7.1 audio
6).When the DIP is in mode (1,0,1) ,all HDMI displays will output 3D signal and stereo audio
7).When the DIP is in mode (1,1,0) ,all HDMI displays will output 3D signal and 5.1 audio
8).When the DIP is in mode (1,1,1),all HDMI displays will output 3D signal and 7.1 audio
9).DIP switch setting
Position ID
-1- -2- -3-
0 0 0
EDID
MIX
0
0
1
EDID copy from output1
0 1 0 EDID
HDMI1.2
2CH
0 1 1 EDID
HDMI1.2
6CH
1 0 0 EDID
HDMI1.2
8CH
1 0 1 EDID
HDMI3D
2CH
1 1 0 EDID
HDMI3D
6CH
1 1 1 EDID
HDMI3D
8CH
Note1:
The matrix will mix the EDID data of the sink devices. The mixed EDID data will use the lowest
resolution of the video and the least channel number of the audio. For example, some sink device support
1080P, some sink device only support 1080i, some support 5.1 audio, but some only support stereo. Then the
mixed EDID will be 1080i and stereo.
Note2:
If user wants to just use one sink device’s EDID data, then please set DIP mode to (0
，
0
，
1) , connect
the sink to output 1.
4
