![background image](http://html.mh-extra.com/html/shur-co/donovan-quick-flip-iii/donovan-quick-flip-iii_owners-manual_1260973019.webp)
P/N 1808684 Rev. I
16
Hydraulic Pump Installation
- continued
NOTE:
To thread fitting body onto end of hose, turn body
counterclockwise until body engages hose about 1". Thread
fitting insert onto body, turning clockwise until insert is snug
against body. Fitting must be threaded completely onto
hoses to prevent leaking.
hose
reusable
fitting
body
reusable
fitting
insert
STEP 4:
Remove shipping plug from fill port and fill pump
with approximately four quarts of Dexron automatic
transmission fluid. Install breather cap onto fill port.
Do not reinstall shipping plug.
STEP 5:
Connect negative wire from battery to stud on hydrau
-
lic pump.
STEP 6:
Connect positive wire from battery to circuit breaker
and from circuit breaker to solenoid on pump.
STEP 7:
Place solenoid cover over solenoid. Secure cover to
pump with 8" cable tie.
CAUTION
Replace shipping plug with breather cap on hydrau-
lic pump or pump will be damaged.
!
STEP 3:
Connect hoses from hydraulic pump to hydraulic
cylinder, making sure hose clamps are tight around
reservoir.
battery
hydraulic
pump
150a
circuit
breaker
p
/
n
1800458
solenoid
reservior
hydraulic
cylinder
hydraulic
hoses
hose
clamp
breather
cap
fill
port
+
_
solenoid
solenoid
cover
cable
tie