background image

©20

13

 Shure Incorporated

27A20378 (Rev. 

3

)

Model Variations

CVO-B/C: 

Cardioid, black

CVO-W/C: 

Cardioid, white

Centraverse Overhead Microphone

The Centraverse CVO is a professional low pro-

file electret condenser microphone designed for 

overhead sound reinforcement applications. An in-

tegrated wire aiming hanger is included for optimal 

placement above choirs and other ensembles with 

minimal effort.

Note:

 Model availability depends on region. 

See your local Shure dealer or distributor for 

details. 

CVO

4

5

Features

• 

Cardioid pickup pattern

• 

Commshield® technology guards against 

unwanted RF interference from portable 

wireless devices (smartphones, etc.)

• 

Superior Shure design and rugged, dependable 

construction

• 

Attached 25 ft XLR cable 

• 

Included snap-fit windscreen

Installation

1.  Attach the wire hanger:

• 

Snap the wire into the groove on the microphone body.

• 

Guide the cable through the spiral at the end of the wire, 

beginning at the bottom and working toward the exit.

2.  Hang the microphone according to the guidelines for placement.
3.  Aim the microphone toward the sound source by holding the wire 

hanger in place and twisting the microphone body.

4.  If necessary, tie a strong transparent thread or fishing line to the loop at 

the end of the wire hanger and attach it to a ceiling anchor for additional 

stability.

5.  Connect the XLR cable to a mixer or P.A. system. 

Note:

 This microphone re48V phantom power to operate.

.6 – 1 m 

(2 – 3 ft.)

.6 – 1 m 

(2 – 3 ft.)

1.8 – 3m 

(6 – 9 ft.)

0.6 – 1m 

(2-3 ft.)

Microphone Placement and Use

1. 

3:1 Rule:

 If using multiple Shure Centraverse overhead micro-

phones, the distance between the microphones should be three 

times greater than the distance between the microphone and the 

sound source.

2. 

Choir Installations:

 Place the microphone in front of the choir, above 

their heads and aimed at the back row.

3. 

Windscreen:

 Use the supplied snap-fit windscreen to eliminate wind 

noise and plosives. To install the windsreen, snap it into the first groove 

on the microphone head. To remove the windscreen, locate the gap 

in the ring and use your fingernail to pull the windscreen off from the 

right-hand side.

Centraverse™ Series 

Installed Sound Microphones

CVO 

Reviews: