Shure Incorporated
23/44
Setting Filter Parameters
Adjust filter settings by manipulating the icons in the frequency response graph, or by entering numeric values. Disable a filter
using the check-box next to the filter.
Filter Type
Only the first and last band have selectable filter types.
Parametric:
Attenuates or boosts the signal within a customizable frequency range
Low Cut:
Rolls off the audio signal below the selected frequency
Low Shelf:
Attenuates or boosts the audio signal below the selected frequency
High Cut:
Rolls off the audio signal above the selected frequency
High Shelf:
Attenuates or boosts the audio signal above the selected frequency
Frequency
Select the center frequency of the filter to cut/boost
Gain
Adjusts the level for a specific filter (+/- 30 dB)
Q
Adjusts the range of frequencies affected by the filter. As this value increases, the bandwidth
becomes thinner.
Width
Adjusts the range of frequencies affected by the filter. The value is represented in octaves.
Note:
the Q and width parameters affect the equalization curve in the same way. The only difference is the way the
values are represented.
