Shure Incorporated
10/28
3.
•
1.
2.
3.
•
•
•
•
•
Power on the other adapter.
Already paired: power them both on at the same time
Reset paired devices list
You may find it necessary to reset the True Wireless adapters.
Place adapters in charging case.
Ensure that the charging case LED is red. If not, remove the adapters from the case and power them on for several
minutes before starting the process again.
Press and hold both buttons, 7 seconds.
The adapters reset.
To keep them sounding their best...
Clean regularly to remove debris and deposits.
Contact Shure Service and Repair to replace damaged product. Simply detach and return the broken earpiece for easy re
placement.
Visit
http://www.shure.com/earphones
for replacement parts and important instructions on cleaning and maintenance.
IPX4 rated sweat and water resistant
The earphones and adapters are designed to be sweat and water resistant but are not meant to be submerged under water.
The IPX4 rating applies to the earphones only
The IPX4 rating does not apply to the earphones while charging
The IPX4 rating does not apply to charging case; it is not sweat and water resistant
Detachable Adapters
Earphones and adapters are interchangeable and replaceable. The connector fits tightly, and may require moderate pressure
to pull apart. Take special care to prevent damage to the earphone or adapter. When reconnecting, listen for a click.
