Shure SCM410E User Manual Download

Page: 9 / 36

SPECIFICATIONS

Measurement Conditions (unless otherwise specified): Line voltage 120 Vac, 60 Hz (SCM410) or 230 Vac, 50 Hz (SCM410E);

full gain;

1 kHz, one channel activated;

source impedances: Mic 150



; terminations: Line/Mic Aux 10 k



Frequency Response (at 1 kHz, channel controls centered)

50 Hz to 20 kHz



2 dB; –3 dB corner at 25 Hz

Voltage Gain (typical, controls full clockwise)

Inputs

Outputs

Total Harmonic Distortion

<0.1% at +4 dBu output level, 50 Hz to 20 kHz (through 22 Hz to 22

kHz filter; Input at 12 o' clock and Master at 12 o' clock, all other con-

trols full counterclockwise)

Hum and Noise (150



source; through 22 Hz to 22 kHz filter)

Equivalent Input Hum and Noise: –123 dBV max., –125 dBV typical

Output Hum and Noise (channel controls full counterclockwise):

Master full counterclockwise: –90 dBV
Master full clockwise: –70 dBV

Common Mode Rejection

>70 dB at 1 kHz

Polarity

All inputs to all outputs are non-inverting

Input Channel Activation

Attack Time: 4 ms
Hold Time: 0.4 s
Decay Time: 0.5 s

Off-Attenuation

13 dB

Overload and Shorting Protection

Shorting outputs, even for prolonged periods, causes no damage.

Microphone inputs are not damaged by signals up to +10 dBV (3V)

Equalization

Low-frequency: 6 dB/octave cut, adjustable corner from 25 to 320

Hz
High-frequency:



6 dB at 5 kHz,



8 dB at 10 kHz, shelving

Limiter

Type: Peak
Threshold: +16 dBu (at output)
Attack Time: 2 ms
Recovery Time: 300 ms
Indicator: Lights red when limiting occurs

Input LEDs

Green on channel activation, red at 6 dB below clipping

Phantom Power

12 Vdc open-circuit through 680



resistors

Operating Voltage

SCM410: 100-120 Vac rated nominal, 50/60 Hz,

100 mA (maximum)
SCM410E; 220-240 Vac rated niminal, 50/60 Hz,

50 mA (maximum)

Mains Inrush Current (230 Vac, SCM410E only)

0.7 A peak

Temperature Range

Operating: –7



to 49



C (20



to 120



F )

Storage: –29



to 74



C (-20



to 165



Overall Dimensions

44 mm H x 219 mm W x 267 mm D (1-

x 8-

x 10-

in.)

Net Weight

1.75 kg (3.86 lbs)

Certifications

SCM410

: UL LISTED to UL 60065 and cUL LISTED to

CAN/CSA-C22.2

No. 60065-3

Canada.

SCM410E: Conforms to applicable European Union Directives.

Low Voltage Directive, 2006/95/EC: Certified to EN

60065. Eligible to bear CE marking. Conforms to European

EMC Directive 2004/108/EC. Meets Harmonized Standards

EN55103-1:1996 and EN55103-2:1996 for residential (E1)

and light industrial (E2) environments.

Authorized European Representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Wannenacker Str. 28
D-74078 Heilbronn, Germany
Phone: +49 7131 72 14 0
Fax: +49 7131 72 14 14
Email: EMEAsupport@shure.de

Electromagnetic Compatibility (EMC) Statement

The SCM410E mixer is intended for use in E1 (residential) and E2

(light industrial) environments, as defined in European EMC stan-

dard EN 55103. It meets the applicable tests and performance cri-

teria found in the standard for these environments. EMC

conformance is based on the use of recommended and supplied

cables.

NOTE:

Under certain circumstances, the SCM410E may be exposed to

outside electromagnetic interference levels beyond what is typical in the
intended environment. Should this occur, additional measures may be
required to reduce interference to acceptable levels. The following table
identifies possible sources of unwanted interference.

Output

Input

Line

Mic

Aux

Low-impedance mic (150



) 80 dB

40 dB

68 dB

Impedance

Input Designed for