- 58 -
Active to Precharge Delay
This item select the SDRAM Active to Precharge Delay.
(8T, 7T, 6T, or 5T)
Ø
The Choice: 8, 7, 6 or 5.
DRAM RAS# to CAS# Delay
This field lets you insert a timing delay between the CAS and RAS
strobe signals, and you can use it when DRAM is written to, read from,
or refreshed. Faster performance is gained in high speed, more stable
performance, in low speed. This field is applied only when synchro-
nous DRAM is installed in the system.
Ø
The Choice: 4, 3 or 2.
DRAM RAS# Precharge
If an insufficient number of cycles is allowed for the RAS to accumulate
its charge before DRAM refresh, the refresh may be-incompleted, and
the DRAM may fail to retain data. Fast gives faster performance; and
Slow gives more stable performance. This field is applied only
when synchronous DRAM is installed in the system.
Ø
The Choice: 4, 3 or 2.
Memory Frequency For
This item sets the main memory frequency. When you use an external
graphics card, you can adjust this to enable the best performance for
your system.
Ø
The Choice: DDR266, DDR333, DDR320 , DDR400 or Auto.
Cpu Clock
Choice
100-132
Auto
DDR266
133-199
Auto
DDR266
DDR333
200-255
Auto
DDR266
DDR320
DDR400
