- 61 -
IDE Primary Master/Primary Slave/Secondary Master/
Second ary Slave PIO
Each IDE channel supports a master device and a slave device. These
four items let you assign which kind of PIO ( Programmed Input / Out-
put ) is used by IDE devices. Choose Auto to let the system auto detect
which PIO mode is best or select a PIO mode from 0-4.
Ø
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3 or Mode 4.
IDE Primary Master/Primary Slave/Secondary Master/
Secondary Slave UDMA
Each IDE channel supports a master device and a slave device. This
mainboard supports UltraDMA technology, which provides faster
access to IDE devices.
If you install a device that supports UltraDMA, change the appropriate
item on this list to Auto. You may have to install the UltraDMA driver
supplied with this mainboard in order to use an UltraDMA device.
Ø
The Choice: Auto or Disabled.
********** On -Chip Serial ATA Setting **********
On-Chip Serial ATA
Ø
The Choice: Disabled, Auto, Combined Mode, Enhanced Mode or
SATA Only.
Disabled : Disabled SATA Controller.
P
a
ra
lle
l A
T
A
S
e
ri
a
l A
T
A
Master
Slave
IDE1
Master
Slave
IDE2
Disable
Serial ATA 1
(Channel 0)
(Channel 1)
Serial ATA 2
