- 36 -
3.3 System Memory Configuration
The MB47N mainboard has two 184-pin DIMM slots that allow you to install
from 128MB up to 2GB of system memory.
Each 184-pin DIMM (Dual In-line Memory Module) Slot can accommdate
128MB,256MB, 512MB and 1GB of PC1600/PC2100 compliant 2.5V single
or double side 64-bit wide data path DDR SDRAM modules.
1. Install Memory:
Install memory in any or all of the banks. The combination shown as follows.
Note:
Note:
Note:
Note:
Note: You do not need to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You can
check the total system memory value in the BIOS Standard CMOS
Setup menu.
2. Upgrade Memory:
You can easily upgrade the system memory by inserting additional DDR
SDRAM modules in available DIMM banks. The total system memory is
calculated by simply adding up the memory in all DIMM banks After up-
grade, the new system memory value will automatically be computed and
displayed in the field "Standard CMOS Setup" of BIOS setup program.
DIMM
DIMM
DIMM
DIMM
Socket
Socket
Socket
Socket
Memory Modules
Memory Modules
Memory Modules
Memory Modules
Module
Module
Module
Module
Quantity
Quantity
Quantity
Quantity
DIMM 1
128MB, 256MB, 512MB and 1GB 184-pin 2.5V
DDR SDRAM DIMM
x 1
DIMM 2
128MB, 256MB, 512MB and 1GB184-pin 2.5V
DDR SDRAM DIMM
x 1
