- 56 -
Boot Other Device (Enabled)
Boot Other Device (Enabled)
Boot Other Device (Enabled)
Boot Other Device (Enabled)
Boot Other Device (Enabled)
If you enable this item, the system searches all other possible locations
for and operating system if it fails to find one in the devices specified
under the First, Second, and Third boot devices.
"
The choice: Enabled or Disabled.
Swap Floppy Drive (Disabled)
Swap Floppy Drive (Disabled)
Swap Floppy Drive (Disabled)
Swap Floppy Drive (Disabled)
Swap Floppy Drive (Disabled)
If you have two floppy diskette drives in your system, this item allows
you to swap the assigned drive letters so that drive A becomes drive B,
and drive B becomes drive A.
"
The choice: Enabled or Disabled.
Boot Up Floppy Seek (Enabled)
Boot Up Floppy Seek (Enabled)
Boot Up Floppy Seek (Enabled)
Boot Up Floppy Seek (Enabled)
Boot Up Floppy Seek (Enabled)
If this item is enabled, it checks the size of the floppy disk drives at start-
up time. You don't need to enable this item unless you have a legacy
diskette drive with 360k capacity.
"
The choice: Enabled or Disabled.
Boot Up NumLock Status (ON)
Boot Up NumLock Status (ON)
Boot Up NumLock Status (ON)
Boot Up NumLock Status (ON)
Boot Up NumLock Status (ON)
This item defines if the keyboard Num Lock key is active when your
system is started.
"
The choice: Off or On.
Gate A20 Option (Fast)
Gate A20 Option (Fast)
Gate A20 Option (Fast)
Gate A20 Option (Fast)
Gate A20 Option (Fast)
This item defines how the system handles legacy software that was
written for an earlier generation of processors. Leave this item at the
deafult value.
"
The choice: Normal or fast.
Typematic Rate Setting (Disabled)
Typematic Rate Setting (Disabled)
Typematic Rate Setting (Disabled)
Typematic Rate Setting (Disabled)
Typematic Rate Setting (Disabled)
If this item is enabled, you can use the following two items to see the
typematic rate and the typematic delay settings for your keyboard.
"
The choice: Enabled or Disabled.
* Typematic Rate (Chars/Sec):
Typematic Rate (Chars/Sec):
Typematic Rate (Chars/Sec):
Typematic Rate (Chars/Sec):
Typematic Rate (Chars/Sec):
Use this item to define how many characters per second a held-down
key generated.
* Typematic Delay (Msec):
Typematic Delay (Msec):
Typematic Delay (Msec):
Typematic Delay (Msec):
Typematic Delay (Msec):
Use this item to define how many milli-seconds must elapse before a
held-down key beings generating repeat characters.
