Page 7
STEP 3
ATTACHING THE TOWERS
ITEMS
REQUIRED
TOWERS
PARTS BAG
1. Unwrap and remove the hardware from the Towers along with loosening the bottom bolt.
2. Position and attach the Towers onto the Plastic Blocks at the Head-End Stand. The Towers
should go
out
from the machine. (Pic 3.2)
3. Insert the bolts that were originally attached to the Towers, through the Wings and out
through the Towers. Tighten once in position. (Pic 3.3)
4. Secure the base of the Towers by tightening down the bottom bolts to the Plastic Blocks.
(Pic 3.4)
3.2
3.3
3.4
