47
English
Onboard Device
Option are in its sub-menu.
Press<Enter>to enter the sub-menu of detailed options.
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) port
on this mainboard.
Ø
The choice: Enabled or Disabled.
USB 2.0 Controller
Select Enabled if your system contains a Universal Serial Bus (USB) 2.0
controller and you have USB peripherals.
Ø
The choice: Enabled or Disabled.
AC97 Audio
This item allows you to select AC 97 audio chip to support Audio.
Disable this item If you are going to install a PCI audio add-on card.
Ø
The Choice: Auto or Disabled.
SuperIO Device
Option are in its sub-menu.
Press<Enter>to enter the sub-menu of detailed options.
Onboard FDC Controller
This item specifices onboard floppy disk drive controller. This setting
allows you to connect your floppy disk drives to the onboard floppy
connector.
Ø
The choice: Enabled or Disabled.
Onboard Serial Port 1
This option is used to assign the I/O address and interrupt request
( IRQ ) for the onboard serial port 1 ( COM1 ).
Ø
The choice: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3,
or Auto.
Onboard Parallel Port
This item allows you to determine onboard parallel port controller I/O
address and interrupt request ( IRQ ).
Ø
The choice: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, or Disabled.