31
English
@
Set Password
This item is to set a supervisor password. Please follow below steps.
New Password Setting:
1. Press the <Enter> key. A dialog box appears to ask you to “Enter password: “.
2. Key in a new password.
The password can not be over eight characters or numbers.
3. The system will then request you to confirm the new password by asking you to
key in the new password again.
4. Once the confirmation is completed, new code is in effect.
No Password Setting:
5. If you want to delete the password, just press the <Enter> key instead of
typing a new password. Follow the procedure as above.
If You Forget Password:
6. If you forget your password, you must turn off the system and clear CMOS.
Please refer to the tech notes at the end of section two for more information.
