213
•
Once set, the nighttime mode operates every night of the week (Monday to Sunday).
•
The timer must be set to the time at which it is to start each night. If for example you wish the
timer to start at 19:00, set the timer to 19:00.
•
The timer can be set to run for between 1 and 12 hours.
•
See the sections h) (Overriding the timers) and i) (Deleting the timers) for information on how
to delay or disable the nighttime timer.
•
If the daytime and nighttime timers overlap, the next timer runs in sequence.
•
If a timer has been set but is not active, the heater goes into sleep mode and switches off.
Setting the nighttime timer:
•
Press
and the display (
10
) will show
.
•
Select the desired temperature with the arrow keys
(
/
).
•
Press
to save
•
Use the arrow keys to select the desired number of
hours (
/
).
•
Press
to save
•
The nighttime timer LED
(
11
)
lights up green when the timer is set and active.
•
It lights up red to show that a timer has been programmed but is not active.
d) Daytime timer: Setting the temperature
You can adjust the temperature that you set for the daytime timer.
