216
•
Hold
down, then press
or
(depending on which timer you wish to override).
•
The heater overrides an active timer or the next timer.
The daytime timer
or nighttime timer
LED lights up red to show that it has been
programmed but
is not currently active.
i) Deleting the timers
Hold down
for 3 seconds to delete the daytime timer.
Hold down
for 3 seconds to delete the nighttime timer.
j) Open Window function
This function allows you to save energy. If the ambient temperature falls by 2°C
or more within 2
minutes, the sensor detects the temperature change and switches the heater off.
Activating the open window function
•
Hold down
for 5 seconds. The display then shows
..
•
Press
to activate the open window function; the display shows ON.
•
Confirm your setting by pressing
or wait for 15 seconds for automatic confirmation.
-
If the ambient temperature falls by 2°C or more within 2 minutes, a sensor
detects the
temperature change and switches the heater off. The display shows
.
-
After 10 minutes the heater switches automatically on again. You can switch the heater on
manually again by pressing
. The
symbol goes out.
Deactivating the open window function
•
Hold down
for 5 seconds. The display then shows
..
•
Press
to deactivate the open window function; the display shows OFF.
•
Confirm your setting by pressing
or wait for 15 seconds for automatic confirmation.
k) Deleting all settings
To delete all settings and to restore the factory defaults, proceed as follows:
•
Switch the appliance OFF.
•
Hold down
and switch the appliance on.
