T
-900 series Chapter 2 How to use the menu
0093142132-00
2-2
2.2
FTC Adjustment
When raining or snowing, due to reflection from
rain or snow, an object is hard to be seen.
By increasing the set value of FTC, the contour
of an object, which was concealed by an image
of rain or snow, appears. But, you may miss a
small object. (Normally, set the FTC to OFF.)
Setup: OFF, 1 to 8 (Initial value: OFF)
Own ship
Land
<Picture with rain clutter>
Own ship
Land
<Picture with rain reflex suppressed>
Result picture after adjustment by FTC
1
Press the [MENU] key.
2
Select [ECHO]
→
[FTC].
3
Change the setup of [FTC] with the [ ] and
[ ] keys.
FTC
1
4
Press the [MENU] key to close the menu.
2.3
Setting of Display Mode
In the display mode, the bearing and the target
motion are displayed in combination.
Setup: H UP RM, N UP RM, N UP TM, C UP RM,
C UP TM, WPT UP RM (Initial value: H UP RM)
1
Press the [MENU] key.
2
Select [ECHO]
→
[MODE].
3
Change the setting of [MODE] with the [ ]
and [ ] keys.
4
Press the [MENU] key to close the menu.
Four bearing displays of [H UP], [N UP], [C UP]
and [WPT UP] are provided.
[NUP] and [SUP] can be swapped.
Refer to [N UP/S UP] in 3.2 Setting of Assist
Items.
Two types of display method
｢
RM
｣
and
｢
TM
｣
are provided for the motion display.
•
Entering the bearing data for C UP, N UP
｢
RM
｣
is required.
•
Entering the bearing, speed and
latitude/longitude data for C UP, N UP
｢
TM
｣
is required.
•
Entering the WPT data for WPT UP is
required.
Your ship heading is assumed 45°in the following
description of each mode.
H UP (Head Up)
The H UP is the display mode to orient the
heading to the top of the screen.
In this mode, the heading is used as a reference
and the screen image, which is similar to the
visibility when navigating your ship, can be seen.
Therefore, this mode is suitable for watching
targets.
NORTH
Land
Target 1
Target 2
Own ship
HDG
