e005 OLIMPO
ver. 00
User’s manual
pag. 12 di 29
Printed in
e005-di OLIMPO (eng).doc
Siap+Micros S.r.l.
1.15.3 TERMINATOR
Finally, the T
erminator
is a field which indicates the end of the record format. The T
erminator
is made up of
character “#” (ASC11 35) + a number which indicates the total number of record (
fields
) between the starting
header ST and the terminator # inclusive. For example
#50
indicates that the record is composed of a total of
50 fields with the
header
ST
and the terminator # included.
1.15.4 An example of the statistical data record format
The monitoring station number 2 on the day, 4
th
February 1996 at 14.00 memorized the
record format
of the
S
tatistical Data
relative to
Temperature
and one for the
Humidity
similar to the following .
ST02 , 6 , 14.00 , 04 , 02 , 96 , 0 , M03 , 1 , B , 18.5 , 1 , C ,17.1 , 1, D , 20.1, #18
where:
ST02
Station number 2
STid_station
6
The constant code of the
dynamic structured
record format
6
14.00
Hour
and
minute
of the event
hh.nn
04
Day
of the event
Gg
02
Month
of the event
Mm
96
Year
of the event
Aa
0
The constant code identified by the S
tatistical Data
0
M03
Means that 3 Blocks which represent 3 parameters will follow
Mnum_input
1
Id of the parameter (
Temperature
)
Id
B
Indicates that the following parameter is an A
verage Statistical Data
constant
18.5
The
Average Statistical Data
of the Temperature
value
1
Id of the parameter (
Temperature
)
Id
C
Indicates that the following parameter is a
Minimum Statistical Data
constant
17.1
The
Minimum Statistical Data
of the
Temperature
value
1
Id of the parameter (
Temperature
)
Id
D
Indicates that the following parameter is a
Maximum Statistical Data
constant
20.1
Maximum Statistical Data
of the
Temperature
value
#18
Terminator
terminator
1.16 The record format of the Instant Data
The Instant Data is available with this record format in
file n.1
of the internal memory of the OLIMPO Main
Unit.
1.16.1 Head
The
Head
of the
Record Format
contains general information which allows you to identify the record based
on the event of a storm and the station which it belongs to. Its format is shown in detail as follows.
ST
id_station
, 6 , hh.nn.ss , gg , mm , aa , 1 , M
num_input
,
