e005 OLIMPO
ver. 00
User’s manual
pag. 1 di 29
Printed in
e005-di OLIMPO (eng).doc
Siap+Micros S.r.l.
1 Precautions and safety measures
Olimpo is a measuring instrument which allows you to acquire electrical measures , elaborate and memorize
them. This unit complies with the requirements set out by the Low Tension 73/23 CEE Directive, modified
according to the 93/68/CEE and the EMC 89/336/CEE
Directives.
This unit has been designed to comply with the CEI EN 61010 Norm, to ensure the safety of the operator it is
necessary that all of the following instructions described in this manual are carried out accordingly and read
with special attention all notes preceded by these symbols:
(Be careful, refer to the documents)
(Be careful, risk of an electric shock)
Olimpo is an instrument which was invented to be used by trained staff for a specific use. The produced
declines any responsibility in the case of faults caused by disobeying the instructions,tampering,any use
which this manual does not indicate,improper use of the unit,operation of the unit by untrained staff.Only
authorized staff should be allowed access to the working area to carry out the standard maintenance
procedures.
-
The unit should be connected to an electric earthing (or of safety) by using a three wired AC power
cable.This cable should be connected to Complied electric socket equipped with three contacts.
-
The unit must not be used near inflammable gases,smoke or anyother surrounding where there is a risk
of explosion.
-
Do not take any measurent if any fault or breakage has been noticed in this unit.
-
Do not enter inside the unit without another person present who would be able to provide help if
necessary.
-
Do not remove,modify or replace any electrical or mechanical part of the unit without authorization.
-
The substitution of any spare parts and all internal checks must be carried out by qualified and trained
maintenance staff,after having disconnected the unit from the electric power supply.
-
Pay attention to any warning notice against potentially dangerous procedures.
1.1 The aim of use
This manual is to provide all necessary instructions for the correct installation and use of the Olimpo product.
The Olimpo Main Unit may be used in the following fields:
1) The acquisition and memorization of the river and basins' level
2) The acquisition and memorization of the height of snow.
3) The acquisition and memorization of analog to digital parameters.
4) An integrated system of remote controlled water supplies.
Preserve with care this manual and always keep a copy avilable for the operators.
